Sagem F@st 244x, Справочное руководство

Страница: 156 / 254

6 - Information / Configuration
SAGEM F@st™ 240x/244x Reference Manual - 288097371-02
Page 6-86
Sagem Communication document. Reproduction and disclosure prohibited
Field Action
Physical LAN Port Select the interface of your choice (ENET, USB,
Wireless or Wireless_Guest) from the scroll down
list.
Protocol Select the protocol of your choice from the scroll
down list (TCP/UDP, TCP, UDP or ICMP).
Source IP Address Enter a "Source" IP address.
Source Subnet Mask Enter a "Source" subnet mask.
UDP/TCP source Port
(port or port:port)
Enter a "Source" port or range of ports.
Note: For one port, for example, enter 80. For a
range of ports, enter 80:90.
Destination IP Address Enter a "Destination" IP address.
SET-1 Destination Subnet
Mask
Enter a "Destination" subnet mask.
UDP/TCP Destination
Port
(port or port:port)
Enter a "Destination" port or range of ports.
Note: For one port, for example, enter 80. For a
range of ports, enter 80:90.
IP Precedence Select the priority you will allocated to "IP
Precedence" from the scroll down list:
Blank : No priority,
0 to 7 : Priority (coded over 3 bits) from the
lowest to the highest.
IP Type Of Service Select the type of service (TOS) to be allocated
(4-bit coding) from the scroll down list.
Normal Service : 0000
Minimize Cost : 0001
Maximize Reliability : 0010
Maximize Throughput : 0100
Minimize Delay : 1000
Differentiated Services
Code Point (DSCP)
Select the DSCP desirated from the scroll down list.
SET-2 802.1p Priority Select a priority value between 0 and 7 from the
scroll down list.