Annex A - Troubleshooting
SAGEM F@st™ 240x/244x Reference Manual - 288097371-02
Sagem Communication
document. Reproduction and disclosure prohibited
Page A-9
A.6 Reinitialising
your
router
To reinitialise your router, click button "Reboot" at the top right of the welcome page of your
HTTP configurator. When you click this button all the LEDs go off, except for the green "
"
LED (WLAN) (if the wireless network is activated); the green "
" LED (PWR) then lights, and
the initialisation process starts. It lasts for around a minute.
Note :
The green "
" (ADSL) and
" (LAN) LEDs light if they are connected.
The "
@
" LED (Internet) lights in green if "PPP" link is established.
A.7 Re-establishing the factory configuration
To undertake the procedure, there are two possibilities:
1) Using the HTTP configurator
•
In the welcome screen of your HTTP configurator, select the heading
Management
followed by the sub-menu
Restore Default
in the
Settings menu
(cf. § 6.11.1.3).
2) Using the "REG" button
•
press
the
REG
pushbutton for at least 15 seconds; all the LEDs go off except for the green
"
" LED (WLAN) (if the wired network is activated);
the green "
" LED (PWR) then all the
LEDs and the process for returning to the factory configuration starts. It lasts for around
2 minutes.
This operation deletes the entire personalised configuration of your
router: Password, Configuration, etc.
After a return to factory configuration, it is
necessary to install your router again
using the installation CD-ROM, or to enter again the ADSL connection data supplied
by your
I
nternet
S
ervice
P
rovider (ISP) (cf. Internet Connection section - § 6.6).
Содержание F@st 244x
Страница 1: ...SAGEM F stTM 240x SAGEM F stTM 244x Reference Manual 288 097 371 02 Edition of January 2007...
Страница 2: ......
Страница 253: ......
