6 - Information / Configuration
SAGEM F@st™ 240x/244x Reference Manual - 288097371-02
Page 6-88
Sagem Communication
document. Reproduction and disclosure prohibited
Field
Action
Mark 802.1p if 802.1q is enabled
on WAN
Select a priority value between 0 and 7 from the
scroll down list.
Note:
The "Enable 802.1q" box is only present in
"Bridging" mode. This condition is
transparent for the other modes.
Physical LAN Port
Select the interface of your choice (ENET, USB,
Wireless or Wireless_Guest) from the scroll down
list.
Protocol
Select the protocol of your choice from the scroll
down list (TCP/UDP, TCP, UDP or ICMP).
Source IP Address
Enter a "Source" IP address.
Source Subnet Mask
Enter a "Source" subnet mask.
UDP/TCP source Port
(port or port:port)
Enter a "Source" port or range of ports.
Note:
For one port, for example, enter 80. For a
range of ports, enter 80:90.
SET-1
Destination IP Address
Enter a "Destination" IP address.
Destination Subnet
Mask
Enter a "Destination" subnet mask.
UDP/TCP Destination
Port
(port or port:port)
Enter a "Destination" port or range of ports.
Note:
For one port, for example, enter 80. For a
range of ports, enter 80:90.
Source MAC Address
Enter a "Source" MAC address.
Source MAC Mask
Enter a "Source" MAC mask.
Destination
MAC Address
Enter a "Destination" MAC address.
Destination MAC Mask
Enter a "Destination" MAC mask.
SET-2
802.1p Priority
Select a priority value between 0 and 7 from the
scroll down list.
Содержание F@st 244x
Страница 1: ...SAGEM F stTM 240x SAGEM F stTM 244x Reference Manual 288 097 371 02 Edition of January 2007...
Страница 2: ......
Страница 253: ......
