Sagem F@st 244x, Справочное руководство

Страница: 145 / 254

6 - Information / Configuration
SAGEM F@st™ 240x/244x Reference Manual - 288097371-02
Sagem Communication document. Reproduction and disclosure prohibited Page 6-75
Field Action Default
Standard Mode Check the box if you wish the IGMP snooping
runs in normal mode (transparency with
IGMP frames). Box checked
Blocking Mode Check the box if you wish the IGMP snooping
runs in blocking mode (interception and
removal of IGMP frames). Box
not checked
Disable DHCP Check this box to not activate your router's
DHCP server.
Note: You must configure your computer
with the parameters appropriate to
your local network (IP address,
subnet mask and default gateway) as
well as enter the primary and
secondary DNS server addresses.
Box not
checked
Enable DHCP Check this box to activate your router's DHCP
server.
Note : You must configure your computer as
DHCP client and DNS client (or
enter the primary and secondary
DNS server addresses).
Box checked
Start IP Address Enter the first address attributed by your
router's DHCP server. 192.168.1.2
End IP Address
11
Enter the last address attributed by your
router's DHCP server. 192.168.1.254
Lease Time (hour)
11
Enter an unavailability time for each address
attributed expressed in hours. 24
Configure the second IP
Address and Subnet
Mask for LAN interface
Check the box to configure the IP parameters
(IP address, subnet mask) of a second
address for the local network (LAN). Box not
checked
IP Address
12
Enter a second address for your local
network (LAN). _
Subnet Mask
12
Enter a subnet mask for the second address
for your local network (LAN). _
11
This field only appears when the "Enable DHCP" field is activated (box checked).
12
This field only appears when the "Configure the second IP Address and Subnet Mask for LAN interface" field is
activated (box checked).