Sagem F@st 244x, Справочное руководство

Страница: 40 / 254

3 - Installing and configuring the SAGEM F@st
TM
2400/2440 router
SAGEM F@st™ 240x/244x Reference Manual - 288097371-02
Page 3-12
Sagem Communication document. Reproduction and disclosure prohibited
3.2 Installing and configuring your Router with the network card
of your computer (Ethernet)
The Ethernet fixed connector marked ETH of the SAGEM F@st™ 2400/2440 is designed for
connecting your computers or wired Ethernet network equipment. It supports 10 Mbit/s and
100 Mbit/s transmission rates in Half or Full Duplex mode on a category 5 double twisted pair
cable.
This port is a RJ45 connector with wiring of the self-detecting MDI or MDI-x type.
With this port, you can connect using a straight or crossed Ethernet cord:
•
either directly to a computer equipped with a 10/100BASE-T Ethernet network,
• or to an Ethernet local network connected to a network concentrator (HUB or Switch).
The installation procedure described below was undertaken in
Windows
®
XP . Installation in other Windows operating systems
®
(98,
ME and 2000) can be slightly different.
1 You have selected the Ethernet
interface; the screen opposite appears.
Make the electrical connection as
described on the screen.
Click the button to
continue the installation.
2 The screen opposite appears.
Make the connection of the ADSL line
as described on the screen.
Click the button to
continue the installation.