Sagem F@st 244x, Справочное руководство

Страница: 18 / 254

2 - Description and connection of router
SAGEM F@st™ 240x/244x Reference Manual - 288097371-02
Page 2-4
Sagem Communication document. Reproduction and disclosure prohibited
Common to all routers
Marking Meaning
LINE RJ11 connector - 6 pts. This connector is identified on the base by a grey
frame (SAGEM F@st
TM
2400/2440) or a grey line
(SAGEM F@st
TM
2404/2444).
It is used for the connection to an ADSL line (WAN interface).
REG This button allows the router to be reset to the factory configuration
(see § A.7).
Note: It is set back relative to the other elements to prevent an accidental
loss of configuration.
On/Off switch.
PWR Miniature jack fixed connector.
This connector enables the router to be supplied with direct current from a
mains adapter unit.
SAGEM F@st
TM
2400 and SAGEM F@st
TM
2440
USB This connector is identified on the base by a blue frame.
It is used only for connection to a computer (USB interface).
ETH RJ45 connector - 8 pts (10/100BASE-T Ethernet Interface). This connector is
identified on the base by a yellow frame.
It is used for connection to a computer or a television set (via a TV/Video
Decoder).
SAGEM F@st
TM
2404 and SAGEM F@st
TM
2444
ETH1 to
ETH4
RJ45 connectors - 8 pts (10/100BASE-T Ethernet Interface). These
connectors are identified on the base by a yellow line.
They are used for connection to a computer or a television set (via a
TV/Video Decoder).