Sage 930i, Руководство по эксплуатации, Страница: 48 / 236

5-1 © Sage Instruments 2000
9100-2930-02 01/31/00
Sage Instruments 930i Communications Test Set
SECTION V
OPTION MENU NUMBERS
The following chart lists each Option Menu number with its description and the purchased option
necessary to receive that function if it is not a standard feature of the 930i.
Option
Menu #
Description Purchased Option Required
1 MODIFY DIAL/RING STANDARD (analog only)
2 SEND DIGIT SEQUENCES STANDARD (analog only)
3 REMOTE CONTROL STANDARD
4 DIGIT ANALYZER STANDARD (analog only)
4 CALL ANALYZER STANDARD (PCM only)
5 RING LOAD PURCHASED OPTION 930i-13 Ring Generator
6 DC VOLT/AMP METER STANDARD (analog only)
7 SUPERVISION THRESHOLDS STANDARD (analog only)
9 WINK TIMING STANDARD (analog only)
10 FREQUENCY SWEEP STANDARD
11 IMPULSE NOISE & HITS PURCHASED OPTION 930i-100, Data Test Package
12 WINK MARGINING STANDARD (analog only)
13 PHASE/AMPLITUDE JITTER PURCHASED OPTION 930i-100, Data Test Package
14 SET TIME AND DATE STANDARD
15 BEEP ON ERR? STANDARD
16 DIGIT RECEIVER TIMEOUT STANDARD (analog only)
17 ENVELOPE DELAY DISTORTION PURCHASED OPTION 930i-100, Data Test Package
18 P/AR RATIO PURCHASED OPTION 930i-100, Data Test Package
19 4-TONE INTERMODULATION PURCHASED OPTION 930i-100, Data Test Package
20 30 BIT DISPLAY STANDARD
21 TOGGLE ABCD BITS STANDARD
22 ABSOLUTE DELAY PURCHASED OPTION 930i-21, Absolute Delay
24 POST TPT DELAY PURCHASED OPTION 930i-12 ROTL Responder, 105E
25 FAR END RESPONDER PURCHASED OPTION 930i-12 ROTL Responder, 105E
26 ROTL/RESPONDER PURCHASED OPTION 930i-12 ROTL Responder, 105E
27 ROTL/INTERROGATOR PURCHASED OPTION 930i-12 ROTL Responder, 105E
29 CALL 102 LINE STANDARD
30 ADJUST TLP STANDARD (analog only)
31 SEND HOOK FLASH STANDARD (analog only)
32 DIAL-UP TESTLINE STANDARD
33 DIAL-UP SWEEP STANDARD
34 SELECT REPORTS STANDARD
35 DUAL TONE SENDER STANDARD
37 LINE STATUS STANDARD (analog only)
39 REMOTE AUDIO PURCHASED OPTION 930i-47 REMOTE AUDIO
40 SEND PCM ALARMS STANDARD
41 READ E-1 VOLTAGE STANDARD
43 E-1 ERROR COUNTERS STANDARD
44 E-1 ERROR HISTORY STANDARD
45 E-1 ERROR INJECT STANDARD
46 E-1 BIT ERROR RATE STANDARD
55 FRACTIONAL E-1 BERT PURCHASED OPTION 930i-51, Fractional E-1 BERT
56 64-KBIT E-1 BERT PURCHASED OPTION 930i-23, Extended Bit Error Rate
59 ECHO CANCELLER DISABLE STANDARD
O
ption Menu
Numbers
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com