Sage 930i, Руководство по эксплуатации

Страница: 30 / 236

3-11 © Sage Instruments 2000
9100-2930-02 01/31/00
Sage Instruments 930i Communications Test Set
Front Panel
Operation
R2 Simple
R2 Simple allows you to make an R2 call using generic setup parameters (e.g., tail, and script).
Parameter Default Description
TAIL
2 Additional digits appended to the end of the forward digits.
(i.e., origin request)
BACK DIGITS
11131 Backward digits that tell the forward end which type of for-
ward digits to send.
N DIGITS
0 The number of destination digits that will be expected at the
answering end before pausing and then sending a pulsed
backward digit (if applicable)
DIGIT TIMOUT
5000 ms If N Digits have not been received, the unit will answer after
this amount of time has elapsed.
PULSE DELAY
3000 ms The delay between the receipt of the last forward digit at the
answering end and the time that the answering end sends a
pulsed backwards digit.
PULSE DURATION
150 ms The length of the pulsed backward digit sent from the an-
swering end.
SZ ACK DELAY
100 ms After the line is seized, thebackward end waits for this amount
of time before sending a Seizure Acknowledgement.
ANSWER DELAY
1000 ms After the last digit was received, the backward unit will wait
this amount of time before answering.
HANGUP DELAY
1000 ms When the unit at the other end hangs up, the near end will
wait this amount of time before going on hook.
ABORT TIME
100 ms After a call fails, the unit will wait this amount of time before
aborting.
MIN SEIZURE
100 ms Any seizure signal that has a shorter duration than this will
be ignored.
MIN ACKNOWLEDGE
100 ms Any seizure acknowledgement signal that has a shorter du-
ration than this will be ignored.
MIN ANSWER
100 ms Any answer signal that has a shorter duration than this will
be ignored.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com