Sage 930i, Руководство по эксплуатации, Страница: 206 / 236

6-3
© Sage Instruments 2000
9100-2930-02 01/31/00
Sage Instruments 930i Communications Test Set
Remote Control
Operation
To change the baud rate:
1. Press K1. The display reads:
SET BAUD RATE: 38400
K1 K2 K3 K4
2. Use the numeric keypad to enter a new baud rate.
• A valid baud rate is between 300 and 38400. The default value is 38400 baud.
3. Press ENT or any soft key (K1-K4) to exit this display. You will be returned to the
SELECT
display.
6-3.2 Parity
Parity is a method of minimizing errors in data transmissions by adding an extra binary signal to each
character to make the total number of 1s or 0s either odd or even for each character.
To change the parity:
1. Press K2. The display reads:
PARITY: NONE EVEN ODD
K1 K2 K3 K4
2. Press K2 under
OFF
for no parity, K3 for
EVEN
parity, OR press K4 for
ODD
parity. The default
is
NONE
. You will be returned to the
SELECT
display.
6-3.3 Bit Number
The bit number is the number of bits that make up a character. 7 bits are used to produce standard
ASCII characters.
Stop bits are the bit or bits following character code in start stop transmissions.
To change the data format:
1. Press K3 under
BIT#
from the
SELECT
display. The new display reads:
BITS PER CHARACTER: 7 8
K1 K2 K3 K4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com