Sage 930i, Руководство по эксплуатации

Страница: 34 / 236

3-15 © Sage Instruments 2000
9100-2930-02 01/31/00
Sage Instruments 930i Communications Test Set
Front Panel
Operation
R1
R1 is like POTS except:
•The backwards end sends a dial delay pulse before sending digits.
•The unit sends a KP at the beginning of a digit string and a ST at the end.
Parameter Default Description
N DIGITS
0 The number of destination digits that will be expected at the
answering end.
DIGIT TIMOUT
3000 ms If N Digits have not been received, the unit will answer after
this amount of time has elapsed.
HANGUP DELAY
100 ms When the unit at the other end hangs up, the near end will
wait for the duration of the specified hangup delay before
going on hook.
ABORT TIME
100 ms After a call has failed, the unit will wait this amount of time
before aborting the call.
MIN SEIZURE
100 ms Any seizure signal that has a shorter duration than this will
be ignored.
DELAY DIAL
200 ms The receiving end tells the sending unit to wait this amount
of time before dialling.
MIN DELAY DIAL
140 ms Any delay dial signal that has a shorter duration than this will
be ignored.
MAX DELAY DIAL
5000 ms At the receive end, this is the maximum duration of the delay
dial signal. If the delay dial signal is longer than this, the call
will be aborted.
MIN ANSWER
100 ms Any answer signal that has a shorter duration than this will
be ignored.
MIN CLEAR
100 ms Any clear signal that has a shorter duration than this will be
ignored.
MAX CLEAR
300 ms The maximum amount of time that the unit will wait before
clearing a call.
MIN IDLE
100 ms After call completion, this is the minimum amount of time the
unit remains idle before it can initiate or receive calls.
In addition, other custom-made protocols may be available on your unit. Refer to
Section 3-1
.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com