![background image](http://html1.mh-extra.com/html/sage/925vst/925vst_user-manual_3446367023.webp)
© 2004 SAGE INSTRUMENTS
9100-0925-01 V1.2
23
•
#0 Responder Number — the farend responder number in register 0; this is a farend
responder phone number that is not included in the phone lists
•
Talk Phone Number — The phone number used when the 925VST is in TALK mode
(For more information on using the 925VST as a telephone, see Using the 925VST as
a Telephone on page 42.)
•
Send Tone Frequency — the frequency used during the Send Measure Tone test
•
Sent Tone Level — the level used during the Send Measure Tone test
A
CTION
In the Action area, you can specify what action should be taken with the parameters you
have specified. Before you can take any action, you must have the 925VST connected to
your computer via an RS-232 cable, and the appropriate com port must be selected in the
upper right area of the application window.
•
Load configuration from 925 — This action transfers the current settings from the
925VST to the application; this is useful for viewing the current settings.
•
Load configuration file from local — This action loads a configuration from a file that
is on your computer.
•
Save configuration to 925 — This action loads the current settings to the 925VST.
This will overwrite the settings that are on the 925VST.
•
Save to local configuration file — This action saves the current settings to a file on
your computer. You can then load this file at a later time.
•
Set 925 to factory defaults — This action resets the settings on the 925VST to the
factory defaults.