![background image](http://html1.mh-extra.com/html/sage/925vst/925vst_user-manual_3446367020.webp)
© 2004 SAGE INSTRUMENTS
9100-0925-01 V1.2
20
3. Press the # key and wait for the prompt tone to cease.
The # indicates the conclusion of remote programming.
NOTE: To remotely enable both echoes on an EGEN test call in progress, use the steps in
the following section.
Minimum On and Off Requirements
•
To recognize DTMF digits, Echo Generator specification requires DTMF digits
remain on for a minimum of 50 milliseconds.
•
Except following the * key, the pause between all DTMF digits (the off time) must be
at least 50 milliseconds. The * key initiates remote programming, and is followed by a
480 milliseconds prompt tone. The off time following a * key press must be at least
530 milliseconds (i.e., 480 plus 50).
Incorrect digit sequences produce an alert signal. If you make a mistake during remote
programming, simply start over. Each * key press begins a new programming sequence.
925Install Tool
The 925Install Tool software allows you to set up the environment options and phone lists
in an application on your computer, then transmit the information via an RS-232 cable to
the 925VST. You can also use the 925Install Tool to upgrade the 925VST application
software. All of these options are described in the following sections.
To install the software, double-click the 925Install icon and follow the installation wizard.
User Configuration
User Configuration
User Configuration
User Configuration
1. Open (double-click) the 925Install application.
2. Click User Configuration on the right side of the application window.
The following screen appears.