![background image](http://html1.mh-extra.com/html/sage/925vst/925vst_user-manual_3446367041.webp)
© 2004 SAGE INSTRUMENTS
9100-0925-01 V1.2
41
T
EST
L
INE
S
TOP
tlstop
The test line stop command takes no arguments. This command stops the currently
running test and waits for the next incoming call. This command only applies in 4-wire
mode.
Test Level Commands
Test Level Commands
Test Level Commands
Test Level Commands
To use test level commands, you must first login in:
•
At the
Login>
prompt, type “login test test” and press enter.
The first “test” is the profile name, and the second “test” is the password.
The 925VST answers with “925 Remote Interface Ready.” Once logged in, the
Login>
prompt is longer displayed.
•
Type “i” and press enter to disable the 925VST inactivity power-off timer.
The 925VST acknowledges this command by returning “ok”.
The following table contains an overview of the test level commands. Details about each
command follow.
i
Initialize the remote interface: used to disable the inactivity
power-off timer
g
Go: Initialize dialing to a responder to begin a test
s
Setup circuit ID, work order and user Id info fields
x
Exit the remote interface
p
Print results of last test
e
Exits a continuous test
I
NITIALIZE
i
The initialize command takes no arguments. It is used only to disable the inactivity
timeout timer to prevent the 925VST from automatically powering off.
G
O
g [responder ID, 'template name']
Use the go command to dial a responder and request a particular template to use.
The
responder ID
is the phone number to dial to connect to the responder. The template
name must be in single quotes and is the actual name of the template to use in the
responder.
An acknowledgment of the command is sent:
Dialing #Responder ID : Test Name : template name
Once a test call has started, there is no further acknowledgment until either the call has
completed or been aborted. If the call completed normal, the response
Call Complete
is
sent. If the call aborted due to an incorrect responder number, a bad template name, SUPR
packet failures, or other errors, the response
Aborted
is sent.