Safegate Group safedock, Руководство пользователя

Страница: 44 / 348

SAFEDOCK®

Safegate Group
Manual Date: 6 February 2015
Chapter: 2 INSTALLATION Version: 2.7
Page 12 of 26
3.1.2 Height Calculation
The installation height depends on the actual situation at each stand:

The laser view toward aircraft must be unobstructed. Possible obstructions may
include a PBB or vehicles on a service road.

The aircraft at the stop-position must be visible in vertical range of the laser view.
The aircraft types (mix) to be used and the range of stop-positions (to nose) affect
the mounting height.

Comfortable pilot view angles towards the Safedock unit throughout the docking
must be considered.
If no acceptable mounting height at the desired position can be used, an alternative
location for the Safedock may be necessary, for example a free standing pole.
Note: It is important to always check with the Project Manager for the location, height
and alignment requirements, for each Safedock installation.
The following variables may be used as a guideline for height calculation:
FIGURE 2.11 HEIGHT CALCULATION
General recommendations:

Mounting height of laser from 4 to 8 metres.

Height of aircraft nose(s) are less than the height of laser.

Stop-position(s) from 2 to 65 metres (T1) or 8 to 50 metres (T2/3).