Safegate Group safedock, Руководство пользователя

Страница: 110 / 348

SAFEDOCK®

Safegate Group
Manual Date: 6 February 2015
Chapter: 3A Operating Procedures Version: 2.7
Page 22 of 30
2.8 EMERGENCY-STOP
Description Position
When the Emergency-Stop button on the Operator Panel is activated,
the Pilot Display shows
STOP (with red border/bars).
Note : Additional Emergency-STOP buttons (other than that on the
Operator Panel) may be connected to the system at the apron level.
Aircraft stops and waits as
directed by Airport
Authorities.
Image
Operator Panel
Image Pilot Display
T1-42 T2-18 T2S-24 T3-9 T3-15
2.9 SBU STOP
Description Position
Any unrecoverable error during the docking procedure generates a
Safety Backup (SBU) condition. The display shows the text
STOP . A
manual backup procedure must be used for docking guidance.
Below there is a list of errors that can be displayed on the Operator
Panel and a short description:

No scan request - Geometry check failed within ID Fail limit

Scan failed - Scanning attempt failed

Scan too slow - No scanning reply within reasonable time

Positioning error - Mirror positioning error

Scanner not ready - Scanner not ready

Lost track - Lost track close to stop

Too far from Cl - Too far from centreline
Aircraft stops and waits as
directed by the Pilot Display.
Image
Operator Panel
Image Pilot Display
T1-42 T2-18 T2S-24 T3-9 T3-15
<Aircraft type> <Flight>
EMERGENCY STOP
<Aircraft type> <Flight>
Scanner failed
SBU STOP
Shut
down