Safegate Group safedock, Руководство пользователя

Страница: 32 / 348

SAFEDOCK®

Safegate Group
Manual Date: 6 February 2015
Chapter: 1 SYSTEM DESCRIPTION Version: 2.7
Page 20 of 20
3.4.7 Brightness
Environmental brightness range from direct sunshine down to an average luminance
of at least 10 lux with a uniformity ratio (average to minimum) of not more than 4 to 1
measured at 2 m height.
3.4.8 Vibration
The Safedock system is tested according to IEC 68-2-64 to meet a level of
satisfactory function at acceleration of 0.1G within the frequency range 10 - 100Hz.
3.4.9 Acoustic Sound and Noise
The Safedock system is tested to meet a sound level not exceeding 45 dBA, relative a
sound reference pressure of 2x10
-5
Pa.
Note : This information may be subject to change for T1 with a Supercooler option.
3.4.10 Pollution Limits
Tested to pollution degree 2 (IEC 664)
3.4.11 Installation Over-voltage Limits
Tested to Category II (IEC 664)
3.5 ELECTROMAGNETIC COMPATIBILITY
3.5.1 General
The Safedock system is tested to fulfil all relevant requirements for EMI/EMC
immunity as stated by FCC part 15 (47 CFR Part 15).
Also, the Safedock system is tested to fulfil all relevant requirements for EMC
immunity as stated by EMC Directive 89/336/EEC and standards as in next section.
3.5.2 Generic Standards
EN 50081-1:1992 Generic Emission Standard; Part 1: Residential,
Commercial & Light Industry Environment
EN 50082-2:1995 Generic Immunity Standard Part 2: Industrial
Environment
3.5.3 Basic Standards
ENV 50140 EMC - Basic Immunity Standard Radiated RF
electromagnetic fields immunity test
ENV 50204 EMC - Basic Immunity Standard Radiated RF
electromagnetic fields immunity test (pulse modulated)
EN 61000-4-4 EMC, Part 4: Testing & measurement techniques.
Sect 4: Transient immunity test
EN 61000-4-2 EMC, Part 4: Testing & measurement techniques.
Sect 2: Electrostatic discharge immunity test.
3.5.4 Product Family Standards
EN 55022 Limits and methods of measurement of radio interference
characteristics of information technology equipment.
EN 55024 Immunity requirements for information technology and
communications equipment. Only parts as Surges,
Voltage Dips and Voltage Interruptions is tested.