Safegate Group safedock, Руководство пользователя

Страница: 113 / 348

SAFEDOCK®

Safegate Group
Manual Date: 6 February 2015
Chapter: 3A Operating Procedures Version: 2.7
Page 25 of 30
CANNOT CONFIRM:
STND <Stand1> <Stand2>
Shut
down Accept
NO CONFIRMATION:
<Aircraft type> <Flight>
Shut
down Accept
2.13 REMOTE START OF DOCKING
– FROM SUPERIOR SYSTEM (OPTION)
Basic docking procedures are complemented with Superior System. All basic docking
commands can be controlled remotely via Superior System or locally, if required.
2.13.1 Start of Docking with Interlocking Stands
Description Position
A docking procedure can be preceded by a check for one or more
interlocking adjacent stands. If this option is enabled, the following steps
will take place:
(a) Any steps performed before the docking normally starts will be
performed as before.
(b) When the docking is about to start, the system will ask for
confirmation from Superior System. If the system receives a
confirmation the docking will start normally. The message
Awaiting
Confirm will be shown, when the request is sent to Superior
System.
(c) If there are any interlocking adjacent stands, the docking will be
halted, and the information about the first interlocking stand will be
shown. This blockade cannot be overridden.
(d) If Superior System is unable to verify the state of one or more
stands, the first two stands will be shown. This blockade can be
overridden by pressing the
Accept key.
(e) If the system is unable to contact Superior System for confirmation,
a message is shown. The docking can be initiated, without Superior
System confirmation, by pressing the
Accept key.
Image
Operator Panel
Image Pilot Display
T1-42 T2-18 T2S-24 T3-9 T3-15
(b)
AWAITING CONFIRM:
<Aircraft type> <Flight>
INTERLOCKED BY:
<Aircraft type> AT <Stand>
Shut
down
(c)
(d)
(e)