![background image](http://html2.mh-extra.com/html/saeco/minuto-hd8662/minuto-hd8662_quick-instruction-manual_4049757018.webp)
18
Instructions
Istruzioni
www.saeco.com/support
EN
Remove the small white water fi lter and
place back the “” water fi lter into
the water tank if it was installed.
Put back the Automatic Milk Frother.
Make sure that it is positioned correctly. If you cannot insert
it, rotate the chrome cover. The Automatic Milk Frother is as-
sembled correctly when the tooth fi ts into the slot.
IT
Rimuovere il fi ltrino bianco e riposizionare
il fi ltro acqua “” (se presente) nel
serbatoio dell’acqua.
Reinserire il Montalatte Automatico.
Verifi care che sia correttamente posizionato. Se non si
riesce ad inserire si deve ruotare la copertura cromata. Il
Montalatte Automatico è montato correttamente quando
il dente s’inserisce nella scanalatura.
1
3
2
EN
Empty the drip tray and
place it back.
Empty the container and
place it back.
Put the water tank back into the machine. The
light
shines steadily. When the
button fl ashes, press it to
start the rinse cycle.
At the end of the rinse cycle,
the
button turns off .
IT
Vuotare la vasca raccogli-
gocce e reinserirla in posi-
zione.
Vuotare il contenitore e
reinserirlo in posizione.
Reinserire il serbatoio nella macchina. Il led
si accen-
de. Quando il tasto
lampeggia premerlo per avviare
il ciclo di risciacquo.
Al termine del ciclo di ri-
sciacquo il tasto
si
spegne.
1
3
2
EN
The machine warms up and performs the rinse cycle.
The
and
buttons fl ash simultaneously.
The descaling cycle has now fi nished.
Empty the container used.
Empty the drip tray and
place it back.
IT
La macchina esegue il riscaldamento ed il risciacquo au-
tomatico.
Il tasto
ed il tasto
lampeggiano contemporane-
amente.
Il ciclo di decalcifi cazione è completo.
Vuotare il contenitore uti-
lizzato.
Vuotare la vasca raccogli-
gocce e reinserirla in posi-
zione.
If the red light shines
steadily and the
light
does not turn off , you
may not have fi lled the
watertank to the MAX lev-
el for rinsing. Fill the wa-
ter tank with fresh water,
and repeat the process
from step 12.
Se il led rosso si ac-
cende ed il led
non
si spegne, il serbatoio
dell’acqua non è stato
riempito fi no al livello
MAX per il risciacquo.
Riempire il serbatoio con
acqua fresca e riprende-
re dal punto 12.