Sabaj K-1 Rotolift+AutoLid, Сборка и руководство по эксплуатации

Страница: 26 / 30

K-ROTOLIFT RF + AUTOLID
helpdesk@sabaj.pl
26
23. POWER GUARD: When you will plug your TV into the control box socket - if the user attempts
to hide the fully operating screen (turned ON), the control box cuts the power out. After lifting
the screen back to the viewing position, the power will be restored to it. If the TV is turned off or
in standby mode, the power will not be cut out. The POWER GUARD function can be turned off
manually - with the lift extended to the preferred position, press the (V) button on the
programmed IR remote control. Closing the lift will reactivate the function.
Lift operating – control
Every control box with RF function is delivered with a pre-progammed RF Remote. Only Sabaj RF
remotes can operate with Sabaj control boxes. The buttons on the RF remote control are pre-
programmed and cannot be changed.
The Control Box has 2 levels of setup.
SETUP mode is acquired by pressing & holding the SETUP button , and is signalized by a RED
SETUP LED light .
Motion MEMORY mode is acquired by pressing the RC-SET button . You will hear short beeping
sound.
NOTE: The lift can be operated by more than one RF remote control. The preferred ranges of
motion will be the same for all remotes.
24. Programming a new RF remote (optional): The control box can store up to 8 different RF
remotes. To program a new RF remote:
a. Press the RC-SET button . You will see this symbol on the digital display
b. Press & hold for about 2 seconds any button on the RF remote. Properly
programmed remote will result with the digital display symbol disappearing, and a
short beep.
25. IR-Multicode - IR Remote Setup (optional - requires the purchase of an IR-EYE
accessory):
The IR-Multicode system allows you to use any infrared remote control of the
most popular TV screen manufacturers. You can program the remote control with which
you control your TV. Some newer remotes work on a Wi-Fi/Bluetooth and, although they
might look like a standard remote, they use a completely different wavelength
– not using
the IR receiver. Please be advised, that you will need the IR-EYE Sabaj Accessory
connected to the controller via the RJ-45 socket to operate your lift with an IR
remote
. To start acquiring the IR remote:
up
down
clockwise
counter-clockwise
fig. 19