Assembly and operating manual
rtv.sabaj.pl/en/home/
28.
Troubleshooting:
The table of symbols on the digital display should also be used as a
troubleshooting guide. Always check, if the green POWER led light is on
– this signals, that
the control box is powered. When you put the plug to the socket, you will hear the beeper
sound, and the green led will be turned on. If the LED is not on, the problem might be with
the control box fuse breakdown, or there is no power in the socket.
Display
Explanation
Solution
Assigning RF remote to
control box
Press any button on RF remote to assign, or
wait 15 seconds to quit mode
Safety system activated
Remove obstacles from the lifts way. Eventually
reduce the safety system sensivity
AUTOLID Limit switch cable
harness disconnected
Check all the connections and contacts from
AUTOLID to control box. Some pins might be
loose due to transport of furniture fitting
LIFT Limit switch cable
harness disconnected
Check all the connections and contacts from Lift to
control box. Some pins might be loose due to
transport of furniture fitting
UP VP Memory approved
-------
Cockwise (M1) rotation
angle approved
-------
Counter-clockwise (M2)
rotation angle approved
-------
Furthest clockwise rotation
acquired (mechanical stop)
-------
Furthest counter-clockwise
rotation acquired (mechanical
stop)
-------
Lift electric motor overload
Lower the lifts load
