K-ROTOLIFT RF + AUTOLID
20
5.
Mount the controller on the brackets (fig. 5), and then connect the controller to the lift. Driver
can be placed anywhere, but remember to keep the right distance for the cable - it should not
snag the lift and TV elements.
NOTE:
Remember that the controller should hang freely. Do not tighten the screws too tight to avoid
breaking the controlbox.
6. Connect the control box to the lift and Autolid system (fig. 6).
After connecting the control box, move the lift up using the „UP” button to allow the TV to be
comfortably hanged.
Pads ISO 7089 size 4
– 2 pcs.
Nuts ISO 4032 M4
– 2 pcs.
fig. 5
fig. 6
Lift plug
AutoLid system plug
