Installation, operating and maintenance manual SKIT/S-DEB
3rd print version
page 59
10 – Operation
RWO GmbH
●
Marine Water Technology
●
Bremen
●
Germany
Issue 2014-04-10
If the password is correct, the display jumps to the user
settings level, and there to the query to change the first
parameter. The reply "NO" is selected by default. Pressing
the Enter button therefore automatically jumps to the next
parameter. Here, the change query is also initially set to
"NO". This way, you can quickly navigate to the parameter
you want to modify.
(If you accidentally skip the desired parameter, you can
press the ESC button once while still in the user settings.
This will go back one level in the menu and thus to the
query if you want to change user settings. If you select
"Yes" here, you jump back to the beginning of the user
settings)
OEL-ERKENNUNG > %
AENDERN? NEIN JA
OIL IDENT > %
MODIFY? NO YES
Note
See
à
10.5.5 Notes on input mapping
WASSER-ERKENNUNG< %
AENDERN? NEIN JA
WATER IDENT < %
MODIFY? NO YES
SPUELZEIT
SEK.
AENDERN? NEIN JA
FLUSHING TIME
SEC.
MODIFY? NO YES
LANGZEIT ALARM
MIN.
AENDERN? NEIN JA
LONG TIME ALARM
MIN.
MODIFY? NO YES
WERKSEINSTELL.HOLEN
NEIN JA
RESTORE DEFAULTS
NO YES
After the last user setting, you leave the level of user
settings and return to the ring structure of the main level.
The next stage in the main level is the question about
changing factory settings.
Changing user settings
10.5.8
If you branched to the user settings as described above,
you must select "YES" to change the individual
parameters (+ button). For the oil detection threshold, this
means:
