Installation, operating and maintenance manual SKIT/S-DEB
3rd print version
page 33
5 – Storage
RWO GmbH
●
Marine Water Technology
●
Bremen
●
Germany
Issue 2014-04-10
5
Storage
5.1
Transport
Depending on unit’s size it comes in adequate packaging.
Protect the units by keeping them in the original packaging
as long as possible. Store the unit dry and frost-free on a
flat surface. For lifting use a crane crossbeam and sling to
the available lifting eyes only.
For lifting use a crane crossbeam and sling only to the
available lifting eyes (X) for the bilge water oil separator
and the provided lifting eyes (Z) for the lid.
Fig. 6 Lifting eyes X and Z
5.2
Unpacking
Open the transport case by removing the top side first.
Then remove the side walls. Pay attention to additional
parts inside the case and keep them next to the unit. For
lifting use a crane crossbeam and sling to the available
lifting eyes only (
à
5.1 Transport).
5.3
Storage
Depending on unit’s size it comes in adequate packaging.
Protect the units by keeping them in the original packaging
as long as possible. Store the unit dry and frost-free on a
flat surface.
