Ruijie M6500-08CQ, Руководство по установке и справочное руководство по оборудованию

Страница: 17 / 54

RG-SS6510
-
4C Series Switch Hardware Installation and Reference Guide Preparation before Installation
- 15 -
2 Preparation before Installation
2.1 Safety Precautions
To avoid body injury and device damage, please carefully read the safety precautions before you install the
RG-S6510-4C.
The following safety precautions do not cover all possible dangers.
2.1.1 Installation Safety

Keep the chassis clean and dust-free.

Do not place the device in walking areas.

Do not wear loose clothes, ornaments or any other things that may be hooked by the chassis during the
installation and maintenance.

Turn off all power supplies and unplug all power cords and cables before the installation or the dismantling.
2.1.2 Removal Safety

Avoid frequent removals after the device is installed.

Turn off all power supplies and unplug all power cords and cables before the installation or the dismantling.

When removing the device, pay attention to the balance and avoid hurting legs and feet or straining the back.
When the device is being removed, do not hold the power supply handle or the fan handle for these parts are not
designed for bearing the entire weight of the device. It will cause damage to the device or to your body if you hold
these parts when removing the device.
To reduce the weight of the chassis during the removal, dismantle the extension module, fan module and the
power supply module first.
Install and operate the device in places where removing is restricted.
2.1.3 Electric Safety

Observe local regulations and specifications when electric operations are performed. Relevant operators must be
qualified.

Carefully check any potential danger in the working area, such as ungrounded power supply, unreliable grounding
of the power supply, and damp/wet ground.

Find out the location of the emergency power supply switch in the room before installation. First cut off the power
supply in the case of an accident.

Be sure to make a careful check before you shut down the power supply.

Do not place the device in a damp location. Do not let any liquid enter the chassis.