RG-SS6510
-
4C Series Switch Hardware Installation and Reference Guide
Product Overview
- 6 -
External Ports
The RG-S6510-4C provides the following ports:
Universal serial bus (USB) port: This port can connect with USB memory to save logs, host versions, warnings
and other diagnostic messages. Therefore, it is more convenient to upgrade the software version of the switch on
line and save the log information.
To protect the data and avoid device damage, use qualified USB flash disks of good brands. At the same time, the
local USB port is compatible with most of the USB controllers except some USB flash disks.
Console port: Use RS-232 interface electrical level and standard RJ45 connector. This interface is connected with
the serial port of terminal PC to perform system debugging, configuration, maintenance, management, and host
software uploading.
Mini-USB serial port: Use mini-USB cable to connect the USB port. This interface is connected with the serial port
of terminal PC to perform system debugging, configuration, maintenance, management, and host software
uploading.
10/100/1000M MGMT port: This is an out-band Ethernet port, which uses standard RJ45 connector. This interface
is connected with Ethernet port of a PC to perform program downloading.
Indicator
Indicator
Panel
Identification
Status
Meaning
System indicator
Status
Off
The system is not powered up.
Solid red
1) One of the modules fails.
2) The internal temperature exceeds the threshold,
and the switching service resets.
Blinking green
The system is initializing.
Solid green
The system is operational.
Solid yellow
The temperature exceeds the threshold.
ID indicator
ID
Off
Device location is disabled.
