Ruijie Networks RG-N18010, Руководство по установке и справочное руководство по оборудованию

Страница: 114 / 144

3) Connect the DC power cords according to the instructions on the panel, which are green with yellow strip (ground
wire), blue (-) and red (+) from left to right, as shown in figure 3-41.
4) Fasten the OT terminal of the DC power cord to the connecting terminal with the screwdriver.
Figure 3-41 Power Cord Instruction on Chassis
Before connecting the power supply, make sure the external power supply matches the power module inside
the unit.
Before connecting the DC power cord to the terminal, make sure the other end of power cord is not plugged
in.
Make sure the power supply is properly connected.
Installation Verification
 Verify if the external power supply matches the distribution panel of the cabinet.
 After installing the equipment, verify if the front/back cabinet doors can be closed.
 Verify that the cabinet has been fastened completely, and does not move or tilt.
 Verify that the equipment has been installed in the cabinet, and all the cables have been fastened to the cabinet.
 Verify that the fan meets the requirement.
 Verify that the power supply is properly selected.
 Verify that the power module is inserted properly and the screws are fastened tightly.
 Please do not power up the switch by yourself and do not perform live-line maintenance.