Ruijie Networks RG-N18010, Руководство по установке и справочное руководство по оборудованию

Страница: 127 / 144

Removing Swappable Interface Modules (Optional)
Removing SFP+/SFP Modules
Take the following steps to remove SFP/SFP+ modules:
1) Unplug the optical fiber.
2) Turn down the handle of the module until it is horizontal. Pull the tab to take out the SFP/SFP+ module, as shown in
figure 7-4.
Figure 7-4 Removing the SFP/SFP+ Module
Precaution
 Unplug the optical fiber before removing the module.
 Do not pull out the module forcefully without turning down the handle of the module.
 Immediately install the dust plug to the module port and the switch fiber port.
Removing SFP+ Cables
Pull the tap out and unlock the module. Take out the SFP+ module gently, as shown in figure 7-5
Figure 7-5 Removing the SFP+ Cable
Precaution
 Pull the tab out before unplugging the cables. Otherwise, the module or the slot can be damaged.
 Immediately install the dust plug to the module port and the switch fiber port.
Removing 40-Gigabit QSFP+ Modules
1) Unplug the optical fiber.
2) If you want to remove the module equipped with a bail-clasp latch, turn down the handle of the module until it is
horizontal and pull the bail-clasp latch to take out the QSFP+ module, as shown in figure 7-6. If you want to remove
the module equipped with a pull tab, pull the tab to take out the QSFP+ module gently, as shown in figure 7-7:
Figure 7-6 Removing the QSFP+ Module Equipped a Bail-clasp Latch