Ruijie Networks RG-N18010, Руководство по установке и справочное руководство по оборудованию

Страница: 26 / 144

Temperature
Storage
Temperature
-40 to 70°C
Operating Humidity 10% to 90% RH (non-condensing)
MTBF 329,000 hours
Weight Net weight: 1.68 kg
Dimensions
(W x D x H)
199 mm x 440 mm x 29.98 mm
The M18010-CM adopts the CR2032 lithium battery. The device may explode if a wrong battery model is
used. Used batteries should be properly disposed of.
M18010-CM II
M18010-CM II is the supervisor module of the RG-N18010 switches and is designed with management and switching
functions.
Module Appearance
Figure 0-6 Appearance of the M18010-CM II Module
External Port
M18010-CM II module provides four external ports:
 USB port: By connecting to the USB port, USB storage devices can store logs, host version, alarms and other
diagnosis information, facilitating online upgrade of switch software and storage of logs.
To secure data and prevent damage to the device, it is recommended to use high-quality flash disks
produced by reliable manufacturers. The USB port is compatible with most USB controllers but may be
unable to identify some USB disk models.
 SD card slot: By connecting to the SD card slot, SD memory cards can store logs, host version, alarms and other
diagnosis information, facilitating online upgrade of switch software and storage of logs.
To secure data and prevent damage to the device, it is recommended to use high-quality SD memory cards
produced by reliable manufacturers. The SD card slot is compatible with most SD memory cards but may be
unable to identify some SD memory cards.
 Console port: As a serial communications port, it uses the RS-232 interface level and standard RJ-45 connector.
This port is used to connect the serial port of terminal computers running on the background for such tasks as
system debugging, configuration, maintenance, management, and host software loading.

10/100/1000M MGMT port: As the 10/100/1000BASE-T Ethernet port, it uses the RJ-45 connector. This port can be
used to connect the device to the Ethernet port of the background computer to load programs. Use the standard
cable to connect the device to the Ethernet port of the background computer.
Button
The M18010-CM II module provides a Reset button, which is used to reset the system. If the button is held for less than
five seconds, it is a short press; if the button is held for five seconds or longer, it is a long press.