Ruckus Wireless ICX 7850 Series, Руководство по установке оборудования

Страница: 36 / 102

26 Ruckus ICX 7850 Switch Hardware Installation Guide
Part Number: 53-1005580-01
Mounting the Device
Installing the 1U, 1.5U, and 2U Universal Kit for Four-Post Racks (XBR-R000295)
Complete the following tasks to install the device in a four-post rack.
1. “Attaching the Front Brackets” on page 26
2. “Attaching the Extension Brackets to the Device” on page 27
3. “Installing the Device in the Rack” on page 27
4. “Attaching the Rear Brackets to the Extensions” on page 28
5. “Attaching the Rear Brackets to the Rack Posts” on page 29
Attaching the Front Brackets
Complete the following steps to attach the front brackets to the device.
1. Position the right front bracket with the flat side against the right side of the device at the front of the device, as shown in
Figure 16 .
2. Insert four 8-32 x 5/16-in. flathead screws through the vertically aligned holes in the bracket and then into the holes on the side
of the device. Use the upper and lower screw holes, leaving the center holes empty.
3. Repeat Step 1 and Step 2 to attach the left front bracket to the left side of the device.
4. Tighten all the 8-32 x 5/16-in. screws to a torque of 15 in-lb (17 cm-kg).
FIGURE 16 Attaching the Front Brackets
1 Device 3 Screws, 8-32 x 5/16-in., flathead Phillips
2 Front brackets