manualshive.com logo in svg

Ruckus Wireless ICX 7150-24, Руководство по установке оборудования

Поделиться
Скачать
Ruckus Wireless ICX 7150-24 Скачать руководство пользователя страница 96

TABLE 17 USB status mode LED when copying files from USB to the system flash is enabled (continued)

LED color

Status of hardware

Recommended action

Flashing amber

Copy failure or application error or USB present
but mount failure/access failure/corrupt.

None.

PoE status mode LED (N/A for non-PoE)

PoE status mode displays the PoE status of each downlink port.

TABLE 18 PoE status mode LED during normal operation

LED color

Status of hardware

Recommended action

Off

PoE is disabled. Port is not providing PoE power.

None.

Steady green

PoE/PoE+/PoH is on. Port is providing power.

None.

Flashing amber

PoE is off due to a fault or not enough PoE power
budget set for the port.

None.

Master/Slave status LED

Refer to the following table to interpret the master and slave status LED.

TABLE 19 Master/Slave status LED during normal operation

LED color

Status of hardware

Recommended action

Off

System is standalone or stack member or PE.

None.

Flashing green

This device is initializing as a stacking unit, and roles are being
assigned.

None.

Flashing amber

The device is in non-operational mode; that is, stacking is enabled but
the current unit is not able to join the stack due to a stack-related error
condition such as image mismatch, configuration mismatch, or license
mismatch.
The device has lost its connection with the master unit.

None.

Steady green

Stacking mode is enabled and this device is the master unit in the
stack or when the unit is standalone.

None.

Steady amber

Stacking mode is enabled and this device is a slave unit in the stack.

None.

Software update status LED

Refer to the following table to interpret the software update status LED.

TABLE 20 Software update status LED during normal operation

LED color

Status of hardware

Recommended action

Off

Software update is not enabled.

None.

Flashing green

Software installation is in progress and it can take up to 12 minutes.

None.

Steady green

Software auto-installation is successfully completed.

None.

Flashing amber

Device tried to boot up from last upgraded software image but could
not, booting up from a different image or image upgrade failed

Contact Technical Support.

Diagnostics status LED

Refer to the following table to interpret the diagnostics status LED.

Monitoring the Device
Interpreting port-side LEDs

Ruckus ICX 7150 Switch Hardware Installation Guide

96

Part Number: 53-1004928-05

Содержание ICX 7150-24




























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды