RTS CS9500, Руководство пользователя

Страница: 15 / 95

Operation Guide
Programming Mode:
3
3
3
03
M
#
RTS Systems Division
You may reprogram the talk and listen assignments on 1-7, just
as you can on a key panel (if they are not restricted via
CSEDIT). Note that the se are the same as the
sequence you would use from a ey panel, except that you must
first enter programming mode by pressing
9.
Program a
talk
key to a point to point.
Program a talk key to a PL.
Program a talk key to
a
special list.
Program a talk key to an IFB.
Program a talk key to an
ISO.
Program a talk key to a Relay.
Program a
talk
key to Call (turns on the lower numbered
talk keys)
Program a listen key to a point to point.
Program a listen key to a PL
Program a listen key to Auto Follow
Program a listen key to Auto Mute
Program a listen key to a special list.
Program a listen key to an IFB.
Program a listen key to an ISO.
Program a listen key to a Relay.
Exit
programming mode
Exit programing mode and turn off all talk listen.
Disconnect
Note: 0-9 are the number keys, * and # are
the
star and pound keys.
is three digits for a key panel number
M
is two digits, for an PL, Relay, Special List, or ISO.
K is a key which you are programming, just press the digit (1-7).
is the key followed by a digit (1-7). This
is used to represent the listen
key.
Rev
B
Page 11 Telex Communications, Inc.