RTS CS9500, Руководство пользователя

Страница: 6 / 95

Operation Guide
RTS Systems Division
DIP switch 1, address settings:
Address Settings: Rear DIP Switch, Switch (down is on, up is off)
Port Number
1, etc
2, etc
3, etc
4, etc
etc
6 ,
etc
7, etc
8, etc
9, etc
etc
4
on
Off
on
O f f
on
O f f
on
off
on
O f f
5 6 7
O f f
on
on
O f f
O f f
on
on
O f f
Off
on
O f f
Off
O f f
on
on
on
on
O f f
O f f
O f f
off
off
Off
Off
Off
O f f
Off
on
on
on
AUTO ANSWER mode will set the unit to answer the phone automatically when it rings. The number
of rings required before it answers is set on internal DIP switch
#2. If
set for manual answer, the line
will
ring until someone at a key panel answers the call.
GENERATE
RING SIGNAL
sets the unit
so that when the phone line is ringing, certain designated
key panels or circuits will receive an audible ring signal.
PASSWORD REQUIRED sets the unit
so that when a call is automatically answered, it will require
that the user enter a password via DTMF before the unit will allow communications. The actual
password is set using internal DIP switch
#3.
PORT ADDRESS tells the unit and the intercom which matrix inputs and outputs belong to the
The settings are the same as for a key panel. The setting is the binary representation of the last digit
of the matrix number which that channel of the is connected. See the address table
above for the actual settings.
BAUD RATE sets the data rate with which the communicates with the intercom. The data
rate for all intercom matrices is BPS (switch off). The data rate for all and
matrices is BPS (switch on).
2.1.2 Internal DIP switch
DIP switch which is located internally to the unit sets the number of rings before the unit auto
answers. Please note that the ring count is approximate.
This
switch has no effect unless the rear panel
DIP
switch is set for auto answer mode. If the ring count is set for a high number and auto answer
is enabled, the unit may be used for mixed mode operation, where key panel operators normally answer
the incoming call, but the line will auto answer in the event they are away from their panels.
Rev B
Page 2 Telex Communications, Inc.