RTS CS9500, Руководство пользователя

Страница: 11 / 95

Operation Guide
RTS Systems Division
3.1.4 Re-dialing the last number:
The remembers the last number which it has dialed.
1. Enter dialing mode by following the instructions for dialing a
call.
2.
Enter The will automatically redial the last number it dialed.
3. Momentarily release the talk key to exit dialing mode.
Note that the number is remembered on a phone line by phone line basis. When the last
number redial command is issued, you will get the last number dialed on that
channel, regardless of which key panel dialed the number. For example, if you have a call
to 818-566-6700 on channel 1 of the TIF, and a call to 201-891-6002 on the other channel,
and you are disconnected, issuing the redial command will re-establish the calls on the
same channels. The redial command may be issued
from
any key panel in the intercom,
not just the key panel that originally dialed the calls.
3.1.5 Dialing a Speed Dial number (stored number):
The has
32
internal memories for storing frequently used phone numbers. To dial
one of these numbers:
1.
Enter dial mode.
2.
where is the clear button on the key pad, and is two digits,
3.
Momentarily release the talk key to exit dialing mode.
are the speed dial code.
3.1.6 Storing a speed dial number:
1.
After dialing the number the usual way, enter the before .you release
2.
Momentarily release the talk key to exit dialing mode.
the talk key to exit dialing mode.
Note: To generate a pause during auto dial, enter This
is
used for example if
you need to enter a digit to get an outside line, and your phone system requires a
pause before continuing to dial.
Each number may contain up to 30 digits. Note that the memory for the stored numbers is
RAM in
the
The numbers are unique to each channel, and each
channel can have different numbers stored in it. If you plan
to use the speed dial feature, it
is to supply the with UPS power, to prevent loosing the speed dial
information when the power fails.
Rev B Page 7 Telex Communications, Inc.