RTS CS9500, Руководство пользователя

Страница: 12 / 95

Operation Guide RTS Systems Division
3.1.7 Answering a
1.
When a line is ringing, the alpha numeric display or LED above the talk key which
is programmed for that line will
flash
rapidly.
2. To answer the call, first turn on the listen key, then press the talk key and speak into
the microphone or headset.
3. If
you have been programmed
as
a default station, your panel
will "ring"
when ever
one of the lines rings. If you do not have a key already programmed, the
ringing
line
will a pear
on
your incoming call key (the key farthest to the right
on
the main
To answer, press the incoming call key and answer. You should copy the
key to main key position, either just before or just after you answer, so you can turn
on
the listen key to hear the caller audio.
3.2
SYSTEM SETUP TO
RECEIVE CALLS
To the intercom system, the is very much like a key anel. the phone lines are to
be used for outgoing calls only, then no programming in CS DIT is necessary. If users are
going to phone into the intercom from the outside, then the needs to be configured
to allow them to use the phone line in much the same way a local user uses
his
key panel.
Programming information for the phone line is entered into the CSEDIT software just as if
the were
an
ordinary key panel, by from the main menu, then
selecting the from the pick of key panels.
o
erates much the same
.
way
as
a key panel, except that the "keys" are really the D on the users
telephone.
32.1 Auto Answer
Mode:
To
use the in auto answer mode, you must first enable auto answer mode on the
rear panel DIP switch, toggle number 1. You may
also
wish to enable Password required,
toggle number 3. In addition, you may select the number of rings before the
unit
answers
(internal DIP switch and the actual password (internal
DIP
switch
When the caller dials into the he will hear the line ring, then the unit will answer,
and beep to request the pass word (if password re uired is enabled). The user then must
enter the password. The-unit
will
beep once to co 'rm a proper password.
If
the password
is not correct, the unit will beep
to
allow another
try.
Once the password has been entered, the will establish communications
on
key
automatically.
From
CSEDIT, this will be talk and listen keys #l.
If
for exam le
the
user
were a camera operator, it mi ht be desirable to program the camera PL as and listen
on talk and listen keys
#l.
the caller were a reporter, you might program
an
on
listen key #1, but no talk on talk key #l.
Keys 2 to
7 may also be programmed.
To use
the other
ke from
the phone, just press the
DTMF
button for the key you wish to use. For example, key was the camera PL, and
you have finished with the
shot,
you may press #1, which
will toggle
off key 1.
If
master
control were pro rammed on key #2, you may then press 2 and call master control.
Likewise, you have an programmed on listen 3, with no talk. If you press 3,
will hear the
IFB.
could have an
IFB
talk
on
it, to allow a caller
to
speak on an
circuit.
Each DTMF button acts as if it were a push
off
switch. When in
Rev
B
Page 8 Telex Communications, Inc.