RTS CS9500, Руководство пользователя

Страница: 26 / 95

1.2 SPECIFICATIONS
System
True digital.
Second
generation Texas
processor. 8 sampling rate. Internal digital input and output gain
processing, filtering.
Loss
dB with pink noise or voice as test input. Test set-up as specified
in our Telephone All dynamic enhancement processing is
With the ovemde and output expander functions
switched-in, trans-hybrid loss
is
enhanced by approximately 12 dB.
Send Level
to
Phone
Line
-10 average level. Maintained by intemal digital AGC.
Frequency Response (caller to output)
200
-
H
Z
+-1
dB.
Noise
and
Distortion (caller to
output)
THD
+
N.
1 caller levels from -48 to -8
Signal-to-Noise: dB. Referred to
-18
phone
ref
to 0
phone line level.
Send Audio Input
XLR female connector. Active Accommodates
-24
to +12
levels in LINE mode; -68
to
-35 in MIC mode. Front panel
screwdriver level adjust.
Caller
Audio Output
XLR male connector. Active differential. Output levels to +14
depending upon
telephone line level and adjustment of front
panel level adjust. Will drive
Output
male connector. Active differential. In mode, this output is
an
isolated second output. In MIX mode,
this is
a combined
send
and
caller output. INPUT
to
MIX Output specifications: Unity
THD; +12 clip point.
6
Telos ON€ INTRODUCTION