42
Display Follower
The individual relay will activate when an alarm occurs and faithfully mimic the state of the output
drive to the associated lamp (flashing, on or off)
FEATURE
FUNCTION SETTING
Display follower
F18
ON
F19
ON
13.5 Individual Channel Dual Repeat Relays
(Option RL2)
In applications that require two repeat relay outputs for each channel a dual channel alarm card
complete with repeat relays and a dual channel relay card are required. The dual channel relay card l
provides the additional set of volt-free changeover contacts. Please note:- As this feature requires
additional card slots it is only available on systems using medium or large windows.
13.6 Customer Specified Response Time (Option CRT**)
The response time for standard units is factory set at 25ms. If alternative response times are
required, option CRT is used to specify a fixed response time, between 1ms and 2 seconds.
13.7 Adjustable Response Time (Option AD*)
If specified at the time of order each channel can be supplied with a trim pot that allows the user to
adjust the response time between two set points as required.
AD1 = 5ms to 50ms
AD2 = 25ms to 2 seconds
AD3 = 5ms to 5 seconds
13.8 Disable Integral Horn (Option DHN)
All units are supplied with an integral piezo audible as standard, which follows the critical audible
group (HNA). If remote audibles only connected to the integral horn relays are required the unit can
be supplied with the horn disabled.
