64
F20- Inhibit Group Repeat Relays On System Test
If any channel in the system has been assigned to either the GPA or GPB relays using function F21
or F22 and system test is pressed the group relays will activate. However if function F20 is enabled
the GPA and GPB relays cannot be triggered by system test.
FEATURE-F20
STATUS LED
Set Channel To Operate The GPA & GPB Relays On System Test
OFF
Set Channel To Inhibit The GPA & GPB Relays On System Test
ON
F21- Critical Group Relay (GPA)
Each channel can be set to operate the critical group relay using function F21. When set the alarm
channel will activate the group relay when an alarm occurs and the relay will remain active until the
alarm has returned to normal and the channel has been acknowledged and reset.
FEATURE-F21
STATUS LED
Remove channel from the critical group relay
OFF
Set channel to operate the critical group relay
ON
F22- Non-Critical Group Relay (GPB)
Each channel can be set to operate the non-critical group relay using function F22. When set the
alarm channel will activate the group relay when an alarm occurs and relay will remain active until the
alarm has returned to normal and the channel has been acknowledged and reset.
FEATURE-F22
STATUS LED
Remove channel from the non-critical group relay
OFF
Set channel to operate the non-critical group relay
ON
F23- Critical Audible Relay (HNA)
Each channel can be set to operate the critical horn relay using function F23. When set the alarm
channel will activate the horn relay when an alarm occurs and the relay will remain active until the
mute or acknowledge pushbutton has been pressed.
FEATURE-F23
STATUS LED
Remove channel from the critical horn relay group
OFF
Set channel to operate the critical horn relay
ON
F24- Non-Critical Audible Relay (HNB)
Each channel can be set to operate the non-critical horn relay using function F24.
When set the alarm channel will activate the horn relay when an alarm occurs and the relay will
remain active until the mute or acknowledge pushbutton has been pressed.
FEATURE-F24
STATUS LED
Remove channel from the non-critical horn relay group
OFF
Set channel to operate the non-critical horn relay
ON
