28
9. Mechanical Details
All unit are built to customer Specific dimensions. All unit are supplied with there own GA
drawing showing all relevant dimensions and layout.
9.1 Panel Mounting Clamps (panel mount version only)
The NEX7250 panel mount version is shipped with the panel mounting clamps fitted to the sides of
the enclosure these must be removed to allow the unit to be placed in the panel cut out and secured
from behind. Once the unit has been placed in the panel cut out the panel clamps and screws are
used to secure the unit as shown below. Maximum panel thickness 5mm
PANEL CLAMP
WITH SCREW
PANEL
AS SCREW TIGHTENS
CLAMP IS SECURED
TO FRAME SECTION
SIT HOOK ON CLAMP
INTO GROOVE IN FRAME
1
2
3