RSG CVS-012, Руководство пользователя

Страница: 39 / 58

5) Setup Menu
To enter the setup menu, press and hold the ‘Enter’ key until the display shows ‘Setup
Menu’. Note: Settings are not automatically saved when returning to status mode.
5.1)
Menu Organization
•
General Options
o
Buzzer (On / Off)
o Backlight (On / Off /Auto)
o
Sidelight Cutout (On / Off)
o
CAN Bus (0 – 255)
o
Handheld (S-Link / Manual / RS485)
o
HRT Single Tap (On / Off)
o Runlock Timeout (0 – 255)
o
Splitter Charger Off (5.0 Volts - 15.0Volts)
o Splitter Charger On (5.0 Volts - 15.0Volts)
o
Siren Tones
§ Standard Yelp (0 – 32)
§ Standard Wail (0 – 32)
§ UK Two Tone (0 – 32)
§ UK Yelp (0 – 32)
§ UK Wail (0 – 32)
§ Pulsar (0 – 32)
§ Standard Two Tone (0 – 32)
o
Manual as Handheld (On / Off)
o
Siren Auto Scroll (On / Off)
o
Siren Auto Airhorn (On / Off)
o
Siren Enable Start (On / Off)
o Delay Settings
§ Ignition Delay A (0-240 minutes)
§ Ignition Delay B (0-240 minutes)
§ Channel Delay A (0-240 minutes)
§ Channel Delay B (0-240 minutes)
o
AND Logic (On / Off)
o
AND Inversion (On / Off)
o
Siren Current Limit (5-19.5 Amps)
•
Factory Defaults
o
Manual
o BTP Focus
o
AKL Ambulance 1
o
RSG Met 1
•
Channel Options
o
Select Channel (1-9, A-G, Siren Enable, Airhorn, Runlock)
§ Operating Mode (See Output Modes )
§ Dropout Voltage (9-15 Volts)
§ Over Current (0.5 - 20.0Amps)
§
Input Selection (Remote / Manual Inputs 1 – 16)
•
Save Settings
o
Confirm Save?
§ Save and Exit
•
Exit Menu