RSG CVS-012, Руководство пользователя

Страница: 30 / 58

1) Specification
1.1)
Absolute Maximum Ratings
•
Supply Voltage: 18 Volts DC.
•
Supply Current: 40 Amps per power bank.
•
Standby Current:
o
Typical: 55 milliamps. (@13.8VDC, no peripherals attached)
o
Max: 65 milliamps. (@13.8VDC, no peripherals attached)
•
Standby Temperature: -20 Deg C – 70 Dec C
•
Operating Temperature: -20 Deg C – 50 Deg C
1.2)
Power
•
2 x 40Amp DC pins on pluggable connector.
o
These MUST be fused with 40Amps fuses.
•
Multiple ground / chassis connections.
o
Ground can be connected at pin 11 of Bank A Output or Bank B Output connector (or
both). If the siren module is going to be used, the ground chassis line should be rated
to handle 15Amps or more.
•
The Split Sense line is used to provide power to the split charge data output. This input
should be protected with a fuse rated at 1 Amp.
1.3)
Digital Inputs
•
16 x Manual.
•
12 x Special functions.
•
1 x PTT switch.
1.4)
Analog Inputs
•
Mic / PTT audio. (with adjustable volume control)
•
Radio audio. (with adjustable volume control)
•
Primary battery (splitter charger) sense.
1.5)
Analog Monitoring
•
Bank A voltage sense.
•
Bank B voltage sense.
•
Internal temperature monitor.
•
16 x Output channel current monitors.
•
Siren system current monitor.
1.6)
Outputs
•
16 x 20 Amp high side current and voltage protected outputs.
•
Siren data.
•
Runlock data.
•
Split charge data.
•
8 Ohm or 11 Ohm 100W siren speaker output.
1.7)
Communication
•
RS485 Communication (compatible with the S-Link protocol)
•
CAN Bus 2.0