RPB Z-LINK ADF, Инструкция по эксплуатации

Страница: 18 / 72

18
Close the visor making sure it
LATCHES
SECURELY to the front of the jaw. Listen for
the visor latching over the tab on the front
of the jaw.
Close the outer visor over inner visor and
lens, making sure the latches at the corners
are secure.
SETUP AND CARE - STANDARD CONFIGURATION
CONTINUED
LENS REPLACEMENT
To replace the Safety Lens, lift up the visor,
unlatch the inner visor from the outer visor
and open them apart. Pull out the lens and insert a new Safety
Lens making sure the tabs of the lens are
in all four attachment points on the visor
and the lens is inside of the guide along the
bottom front edge of the visor.
FIGURE 3.1 FIGURE 3.2
FIGURE 3.3 FIGURE 3.4