RPB Z-LINK ADF, Инструкция по эксплуатации

Страница: 19 / 72

19
Place the visor onto the helmet pivot points,
insert the pivot pins and springs, then screw
in the attachment screws from the inside of
the helmet until tight.
To replace the Visor, from inside of the
helmet, unscrew the center screw from the
visor pivot point on each side.
To attach the Visor, insert the selected
Safety Lens into the inner visor and secure
the inner and outer visors together.
Remove the cap, pivot pin, and spring from
the visor on both sides. Pull the visor out
of the pivot points and remove from the
helmet.
VISOR REPLACEMENT
FIGURE 4.1
FIGURE 4.2
FIGURE 4.3
FIGURE 4.4