RPB Z-LINK ADF, Инструкция по эксплуатации

Страница: 7 / 72

7
RESPIRATOR COMPONENT DIAGRAM - PAPR
FIGURE 1.1
1. RESPIRATOR
HELMET
ASSEMBLY
2. BREATHING
TUBE
ASSEMBLY
3. AIR SUPPLY
PX4 AIR
®
CAUTIONS AND LIMITATIONS
POWERED AIR
A. Not for use in atmospheres containing
less than 21% ±1% oxygen.
B. Not for use in atmospheres immediately
dangerous to life or health.
C. Do not exceed maximum use
concentrations established by regulatory
standards.
F. Do not use Powered Air-Purifying
Respirators if airflow is less than 115 lpm
(4 cfm) for tight fitting face pieces or 170
lpm (six cfm) for hoods and/or helmets.
H. Follow established cartridge and canister
change schedules or observe ESLI to
ensure that cartridge and canisters are
replaced before breakthrough occurs.
I. Contains electrical parts that may cause
an ignition in flammable or explosive
atmospheres.
J. Failure to properly use and maintain this
product could result in injury or death.
L. Follow the manufacturer’s User’s
Instructions for changing cartridges,
canister and/or filters.
M. All approved respirators shall be
selected, fitted, used and maintained in
accordance with applicable regulations.
N. Never substitute, modify, add or omit
parts. Use only exact replacement parts
in the configuration as specified by the
manufacturer.
O. Refer to User Instructions, and/or
maintenance manuals for information
on use and maintenance of these
respirators.
P. The Z-Link ® is not evaluated as a
respirator for use as a surgical mask.
S. Special or Critical User Instructions and/
or specific limitations apply. Refer to
“S-Special or Critical User Instructions”
in the PX4 Air
®
Instruction Manual
before donning.