RPB Z-LINK ADF, Инструкция по эксплуатации

Страница: 14 / 72

14
Do not use the Z-LINK ® for welding without the Auto Darkening
Protection Filter in place. Do not weld with only the grinding lens. Improper use may
cause blindness or other permanent eye damage.
WARNING
(page 31) for important safety-related use and care information. Check the prescribed shade level
for your welding application and adjust your auto-darkening filter accordingly (see table with
recommended shade levels, page 33). Never place the auto-darkening welding filter (ADF) on hot
surfaces. Do not expose the ADF to liquids and protect it from dirt. See ADF storage, maintenance,
and cleaning information (page 32). Make sure the helmet completely blocks any accidental
light. Make sure light can only enter the front of the helmet through the viewing area of the auto-
darkening welding filter.
Welding and Grinding
For welding and grinding applications that produce sparks, be sure to use the FR (Fire Retardant)
specific model of the PX4 AIR
® with the FR belt and spark arrestor in place, see the PX4 AIR ®
Instruction Manual. Use a RPB
®
Zytec
®
face seal or shoulder cape for protection from sparks,
debris, and light flashes. Make sure all skin, such as the neck, is covered to prevent UV radiation
and burns.
Confined Spaces
If this respirator is used in confined spaces, ensure the area is well ventilated and that all
contaminant concentrations are below those recommended for this respirator. Follow all
procedures for confined space entry, operation, and exit as defined in applicable regulations and
standards.
Welding in Confined Spaces
Welding in a confined space can present an atmospheric hazard due to the generation of
contaminants and displacement of oxygen. A pressure-demand SCBA or a multifunctional
pressure-demand supplied-air respirator with self-contained air supply shall be used during
welding in confined spaces when welding can reduce the ambient oxygen level and supplemental
ventilation and atmospheric monitoring are not provided.
PRODUCT USER SAFETY INSTRUCTIONS CONTINUED