RPB Z-LINK ADF, Инструкция по эксплуатации

Страница: 29 / 72

29
To remove the Welding Visor from the
Z-LINK
®
, pull the sides of the Welding Visor
out until the connection sockets snap out of
the Pivot Pins in the Z-LINK
®
. This can also
be done while wearing the Z-LINK ® .
If the Welding Visor is not going to be used
again for a while, the socket caps can be
snapped back into the Pivot Pins to keep the
area free of debris.
FIGURE 15.5 FIGURE 15.6
When using the PX4 AIR
®
with the 03-995 A2P3 Gas Cartridge,
the 18-533 QUIET-LINK ™ Ear Defenders must be used. Do Not use the Z-Link+ ® with the
03-995 A2P3 Gas Cartridge, as the combined weight of Visor and Earmuffs exceeds the
limits.
WARNING