Rottler SG9A, Руководство по эксплуатации и обслуживанию

Страница: 7 / 55

Introductions / Safety / Installation 2-2 SG9A Manual
www.rottlermfg.com
Safety
Information
:
WARNING
For Your Own Safety Read This Instruction Manual Before Operating This Machine.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible injury or death.
DANGER
DANGER indicates an imminently hazardous situation which, if not avoided, will result in
death or serious injury.
WARNING
WARNING indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in
minor or moderate injury.
CAUTION used without the safety alert symbol indicates a potentially hazardous situation
which, if not avoided, may result in property damage.
WARNING
This machine is capable of causing severe bodily injury.
Safety Instructions for Machine Use
KEEP GUARDS IN PLACE and in proper working order.
KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.
KEEP CHILDREN AND VISITORS AWAY. All children and visitors should be kept a safe distance from work area.
WEAR THE PROPER APPAREL. DO NOT wear loose clothing, gloves, rings, bracelets, or other jewelry which
may get caught in moving parts. Non-Slip foot wear is recommended. Wear protective hair covering to contain
long hair.
ALWAYS USE SAFETY GLASSES. Also use face or dust mask if cutting operation is dusty. Everyday eye
glasses only have impact resistant lenses, they are NOT safety glasses.
DO NOT OVER-REACH. Keep proper footing and balance at all times.
USE THE RECOMMENDED ACCESSORIES. Consult the manual for recommended accessories. The use of
improper accessories may cause risk of injury.
CHECK DAMAGED PARTS. Before further use of the machine, a guard or other part that is damaged should be
checked to determine that it will operate properly and perform its intended function. Check for alignment of moving
parts, breakage of parts, mounting, and other conditions that may affect its operation. A guard or other part that is
damaged should be properly repaired or replaced.