Rottler SG9A, Руководство по эксплуатации и обслуживанию

Страница: 30 / 55

Selecting the Cylinder Head 11-1 SG9A Manual
www.rottlermfg.com
The next screen to appear is the Cylinder Head Select screen. At this point, select any Head or type Test by
pressing NEW Button and the Keyboard will appear, type the cylinder head type and press enter, select the head
you inner and press SELECT to continue to the next screen.
Alter cylinder head model has been select (Caterpillar 3500 or the cylinder head that you have inner, in this case is
Caterpillar 3500), press the ENTER button to start using the Rottler Program.
General Information:
Once selected, all operations of the SG9A can perform are stored in that Cylinder Head model.
The following is a more detailed list on the head selecting screen.
Head Select:
This screen allows you to select, create, edit or delete a Cylinder Head model.
This will change the screen to the MODE SELECT Screen.
New:
Pressing this button will bring up and ADD and DONE button next to the NEW CYLINDER HEAD MODEL entry
screen. Using the keyboard, type the desired name for your block. Press ADD. This will add the block to
the list on the left. When you are finished entering block models press DONE.
Edit Head Model:
To Edit a Cylinder Head Model name, select a Cylinder Head from the list on the left and then press EDIT .
This will put the name of the selected block in the EDIT CYLINDER HEAD MODEL screen. Use the keyboard to
edit the name, press SAVE and DONE.