Additional Programmer Utilities
CP-R25 Hardware & Software Manual
Page 34
6.9
Fingerprint Utilities
The fingerprint utility allows you to enroll fingerprints to a
preconfigured User card without changing the carious
information written on the card or to verify the fingerprint
written on to a card.
6.10
Enrolling Fingerprints on a Preconfigured User Card
The AS-B01 software allows you to enroll fingerprints onto a
card already configured with the User card ID.
To Enroll fingerprints to a preconfigured user card:
1. Select
the
Swipe Reader
tab.
2. In
the
Operations
area select
Finger utilities
.
3. From
the
Operation Type
drop down menu select
Enroll
fingerprints to card
.
4. Select
the
number
of fingers to enroll.
5. Check
the
Verify after enrollment
checkbox to verify the
enrolled fingerprints if required. This usually not required as
the CP-R25 Desktop Programmer has an automatic internal
verification on enrollment.
6. For security reasons, the
KeyA
for the card needs to be
written, to keep the KeyA value, type the same value in the
New KeyA,
the
Confirm New KeyA,
and the
Current KeyA
fields.
7. Place the card on the CP-R25 Desktop Programmer
antenna area.
8. Click
Start
to begin programming the MIFARE card.
9. Instruct the person whose fingerprints are being enrolled to
swipe their finger on the finger sensor, located on the CP-
R25 Desktop Programmer, in the direction indicated by the
Fingerprint Directional Indication LED’s.
10. Follow the instructions messages in the Message Log area
to repeat the fingerprint swipe process three (3) times.
Содержание Mifare CP-R25
Страница 2: ......
Страница 41: ...Maintenance CP R25 Hardware Software Manual Page 40 ...
Страница 51: ......
Страница 52: ...0706 0960349 00 www rosslaresecurity com ...