Rosslare Mifare CP-R25, Руководство по аппаратному и программному обеспечению

Страница: 28 / 52

Programming Cards and Tags
CP-R25 Hardware & Software Manual Page 27
To enroll fingerprints on a MIFARE User Card:
1. Select Swipe Reader tab.
2. Select the applicable Operation Mode , either Sector or
Card Serial Number (CSN) .
For Sector operation mode, define the ID Location using
the Sector Number , Block Number , and Byte Number fields.
3. Ensure that the Operations is set to Program Card .
4. From the Operation Type dropdown menu, select Program
User Card ID + KeyA + template .
If Card Serial Number (CSN) is used the Operation type
value is Program User Card KeyA + template
5. Select the Card Type , either Mifare 1 K or Mifare 4 K .
6. From the Transmit Format dropdown menu, select the
applicable transmission format.
7. Enter the specific card KeyA to be authenticated by the
reader as the unique KeyA for the organization or site. Type
the same value in the New KeyA and the Confirm New
KeyA fields, enter the Current KeyA of the card being
programmed.
Note:
The KeyA number is hidden by "*" characters, so write down
the new key and keep it in a safe place to avoid exposing
this secret key to unauthorized personnel. The KeyA value is
entered as a 12 hexadecimal digit. The default KeyA is
FFFFFFFFFFFF.
8. Select the number of fingers to enroll onto the MIFARE User
Card.
9. check the Verify after enrollment checkbox to verify the
enrolled fingerprints if required. This usually not required as
the CP-R25 Desktop Programmer has an automatic internal
verification on enrollment.
10. For Sector Operation Mode , type the User Card ID or scroll
using the Up and Down arrows. The value can be between
0 and 16777215.
11. Place a MIFARE card on the CP-R25 Desktop Programmer
antenna area.