Programming Cards and Tags
CP-R25 Hardware & Software Manual
Page 28
12. Click
Start
to begin programming the MIFARE card.
13. Instruct the person whose fingerprints are being enrolled to
swipe their finger on the finger sensor, located on the CP-
R25 Desktop Programmer, in the direction indicated by the
Fingerprint Directional Indication LED’s.
14. Follow the instructions messages in the Message Log area
to repeat the fingerprint swipe process three (3) times.
If enabled in the system settings (see Global Options,
Error!
Reference source not found.
,
Error! Bookmark not defined.
),
the system will alert if the card being programmed is not
empty. The Card not empty, do you want to overwrite it?"
prompt message is displayed. “Choose to either
Continue
or
Cancel
. A long buzzer beep indicates failure
On successful completion of all three reads and card
programming, 3 short beeps are generated and a success
message "Writing template to card succeeded" is
displayed in the Message Log area.
If the programming is a failure there is a short buzz and the
swipe Card Reader LEDs lights red for three seconds.
To program and enroll additional user cards, repeat steps 10 to
14.
Содержание Mifare CP-R25
Страница 2: ......
Страница 41: ...Maintenance CP R25 Hardware Software Manual Page 40 ...
Страница 51: ......
Страница 52: ...0706 0960349 00 www rosslaresecurity com ...